View MSM9560_327473.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

E2F0011-29-32 Semiconductor
Semiconductor MSM9560
IC for FM Multiplex Data Demodulation
This version: Mar. 1999 MSM9560 Previous version: Jun. 1998
GENERAL DESCRIPTION
The MSM9560 is an IC which demodulates FM character multiplex signals in the DARC (Data Radio Channel)*1 format to obtain digital data. The MSM9560 operates at 4.5 to 5.5 V. In the DARC system, 16 kbps of digital data L-MSK modulated at 76 kHz is multiplexed on an ordinary FM broadcast base band signal. The MSM9560 contains on one chip a band pass filter using a switched capacitor filter (SCF) and a group of circuits including a frame synchronization circuit and an error correction circuit. By connecting an external FM receiver and memory for temporary data storage and by controlling them by the CPU, a system for obtaining digital data can easily be constructed. The FM multiplex demodulation ICs, the MSM9500-series devices, are configured with minimum functions; so they will, merely by making changes to the software of the external microcomputer, be able to respond flexibly to the many FM multiplex broadcast services that are going to come about in the future. The MSM9560 is best suited to radios and information processing devices that support DARC FM multiplex broadcasting. It is also best suited to car radios and car navigation systems. *1 DARC is a registered trademark of NHK Engineering Services. Any manufacturer licensed by NHK Engineering Service can manufacture and sell products that utilize the DARC technology. For detailed information on license, please contact: NHK Engineering Service Phone: 81-3481-2650
FEATURES
* Pin compatible with MSM9552/MSM9553 * Built-in bandpass filter (SCF) * Built-in block synchronization circuit and frame synchronization circuit * Setting of the number of synchronization protection steps can be changed * Data clocks are regenerated by digital PLL * 1T delay detection * Built-in vertical and horizontal error correction circuits * Built-in layer 4 and layer 2 CRC processing circuit * Parallel interface with microcontroller * Clock output for external devices (64 kHz to 8.192 MHz variable) * Compatible with the international standard frame format (ITU-R Rec. BS1194) * Power supply: 4.5 to 5.5 V * Package: 44-pin plastic QFP (QFP44-P-910-0.80-2K) (Product name: MSM9560GS-2K)
1/7
Semiconductor
BLOCK DIAGRAM
Limiter
AIN LPF Variable gain AMP BPF (SCF) + - Clock regeneration Block synchronization Frame synchronization Timing control
Vref SG
Filter Section
PN Descrambler IC internal clock DB2 WR31 CLR DVDD D CK Q 1T delay circuit 34Byte RAM 2 Read/Write register Error correction & Layer 2 CRC Layer 4 CRC
Data bus Address bus
Limiter
Frequency divider LPF + -
CPU interface
Digital Signal Processing Section
Delay Detection Section
MSM9560
XOUTC
XOUT
XTAL2
XTAL1
Data bus DB0-DB7
Address AD0-AD5
RD
WR
CS
CLR
INT
2/7
Semiconductor
PIN CONFIGURATION (TOP VIEW)
MON 1 ADETIN 2 AVDD 3 AGND 4 SG 5 AIN 6 XOUTC 7 MOUT0 8 MOUT1 9
,
42 IOWR 41 IORD 44 NC 40 CLR 43 NC 39 NC
MOUT4 12 MOUT5 13 MOUT6 14 INT 15 WR 16 NC 17
MSM9560
37 A4
36 A3
35 A2
DB2 21
34 A1
38 A5
33 A0 32 XOUT 31 CS 30 XTAL2 29 XTAL1 28 DVDD 27 DGND 26 DB7 25 DB6 24 DB5 23 DB4
RD 18 DB0 19 DB1 20 DB3 22
MOUT2 10 MOUT3 11
NC : No-connection pin 44-Pin Plastic QFP
3/7
Semiconductor
MSM9560
PIN DESCRIPTIONS
Function Microcontroller Interface Pin 16 18 15 31 40 33 to 38 19 to 26 Tuner Interface Analog Section Test Digital Section Test 6 5 1 2 41 42 8 to 14 Clock 29 30 32 7 Power Supply 3 4 28 27 Symbol WR RD INT CS CLR A0 to A5 DB0 to DB7 AIN SG MON ADETIN IORD IOWR MOUT0 to MOUT6 XTAL1 XTAL2 XOUT XOUTC AVDD AGND DVDD DGND O I O O I -- -- -- -- Digital section test signal output and monitor output pins. 8.192 MHz crystal connection pin. 8.192 MHz crystal connection pin. Pin for supply of 64 kHz to 8.192 MHz variable clock to the outside. XOUT output control pin. "L" = Clock output, "H" = Output disabled. Pulled up internally. Analog section power supply pin. Analog ground pin. Digital section power supply pin. Digital ground pin. Type I I O I I I I/O I O O I I Description Write signal to internal register. Read signal to internal register. Interrupt signal to microcontroller. "L": An interrupt is generated. Chip select signal. "L": Read, write, and data bus signals become active. "L" : the internal registers are initialized and the device enters power down mode. Address signal to internal register. Data bus signal to internal register. FM multiplex signal input. Analog reference voltage output pin. Connect a capacitor between this pin and analog ground to prevent noise. Analog section waveform monitoring pin. The analog block mode setting is specified by the analog control register. Analog signal input pin for testing. Digital section test signal input pins. Internally pulled up.
4/7
Semiconductor
MSM9560
ABSOLUTE MAXIMUM RATINGS
Parameter Power Supply Voltage Input Voltage Output Voltage Maximum Power Dissipation Storage Temperature Symbol AVDD DVDD VI VO PD TSTG Ta = 25C, per package Ta = 25C, per output -- AVDD = DVDD Ta = 25C Condition Rating -0.3 to +7.0 -0.3 to AVDD + 0.3 -0.3 to DVDD + 0.3 400 50 -55 to +150 mW C V Unit
RECOMMENDED OPERATING CONDITIONS
Parameter Power Supply Voltage Crystal Oscillation Frequency FM Multiplex Signal Input Voltage Operating Temperature Symbol AVDD DVDD fXTAL Condition AVDD = DVDD -- Composite signals VAIN Top including multiplex signals -- -40 to +85 C -- 0.5 to 2 VP-P AIN Range 4.5 to 5.5
8.192 MHz 100 ppm
Unit V --
Applied Pin AVDD DVDD XTAL1, XTAL2
ELECTRICAL CHARACTERISTICS
Parameter Symbol Condition When operating, no load Supply Current IDD f = 8.192 MHz When in power down mode, no load BPF Pass Band Attenuation GAIN1 72 to 80 kHz Variable gain amplifier gain: 0 dB 0 to 53 kHz Variable gain amplifier gain: 0 dB 100 to 500 kHz Variable gain amplifier gain: 0 dB Min. Typ. Max. Unit Applied Pin -- -- 14 -- 28 20 mA mA AVDD, DVDD
--
--
3.0
dB
MON
BPF Stop Band Attenuation
GAIN2
50
--
--
dB
MON
BPF Stop Band Attenuation
GAIN3
50
--
--
dB
MON
5/7
Semiconductor
APPLICATION CIRCUIT
MSM9560 8 bits FM tuner FM multiplex data demodulation IC
Microcomputer
Buffer RAM CPU ROM
Font ROM
LCD driver
16 kanji characters2 lines LCD display
MSM9560
6/7
Semiconductor
MSM9560
PACKAGE DIMENSIONS
(Unit : mm) QFP44-P-910-0.80-2K
Mirror finish
Package material Lead frame material Pin treatment Solder plate thickness Package weight (g)
Epoxy resin 42 alloy Solder plating 5 mm or more 0.41 TYP.
Notes for Mounting the Surface Mount Type Package The SOP, QFP, TSOP, TQFP, LQFP, SOJ, QFJ (PLCC), SHP, and BGA are surface mount type packages, which are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki's responsible sales person on the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times).
7/7
E2Y0002-29-11
NOTICE
1. The information contained herein can change without notice owing to product and/or technical improvements. Before using the product, please make sure that the information being referred to is up-to-date. The outline of action and examples for application circuits described herein have been chosen as an explanation for the standard action and performance of the product. When planning to use the product, please ensure that the external conditions are reflected in the actual circuit, assembly, and program designs. When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating temperature. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified maximum ratings or operation outside the specified operating range. Neither indemnity against nor license of a third party's industrial and intellectual property right, etc. is granted by us in connection with the use of the product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a third party's right which may result from the use thereof. The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g., office automation, communication equipment, measurement equipment, consumer electronics, etc.). These products are not authorized for use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property, or death or injury to humans. Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace equipment, nuclear power control, medical equipment, and life-support systems. Certain products in this document may need government approval before they can be exported to particular countries. The purchaser assumes the responsibility of determining the legality of export of these products and will take appropriate and necessary steps at their own expense for these. No part of the contents cotained herein may be reprinted or reproduced without our prior permission. MS-DOS is a registered trademark of Microsoft Corporation.
2.
3.
4.
5.
6.
7.
8.
9.
Copyright 1999 Oki Electric Industry Co., Ltd.
Printed in Japan

▲Up To Search▲

Price & Availability of MSM9560

	To Download MSM9560 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .